PEMBAKAR GAS (DUA TAHAP)

Seri burner RS ​​mencakup rentang pembakaran dari 44 hingga 2290 kW, dan telah dirancang untuk digunakan dalam boiler air panas suhu rendah atau sedang, boiler udara panas atau uap, boiler minyak diatermik. Operasi adalah “dua tahap progresif”; pembakar dilengkapi dengan kotak kontrol keamanan pembakar berbasis mikroprosesor yang menyediakan indikasi operasi dan diagnosis penyebab kesalahan. Peningkatan kinerja kipas dan kepala pembakaran, menjamin fleksibilitas penggunaan dan kerja yang sangat baik di semua kecepatan pembakaran. Desain eksklusif memastikan pengurangan dimensi, penggunaan dan perawatan sederhana. Optimalisasi emisi suara dijamin oleh desain khusus dari sirkuit penghisap udara dan dengan memasukkan bahan kedap suara. Berbagai macam aksesori menjamin fleksibilitas kerja yang lebih tinggi.

RIELLO RS 70-100-130-190-250

Quality engineered for North American emission Standards and available in full modulating operation, Riello R-Series gas burners come with standard features that deliver high efficiency and reduced fuel consumption for applications such as hot water and steam boilers, thermal oil heaters and other light industrial processes with high-capacity requirements.
The RS burner’s factory pre-wired, integrated control panel offers user-friendly operation and ease of service while contributing to an extremely compact overall design.
Sound deadening material incorporated within the air intake housing further contributes to the RS’s low-noise operation.
Riello’s quality engineered, die-cast aluminum construction allows for the RS’s remarkably compact design, light weight and ease of installation.
Riello R-Series gas burners are available in firing rates from 198 to 10034 MBtuh to handle a broad range of commercial, industrial and process applications. Offered in a variety of configurations with optional accessories, our RS models deliver uncompromising performance and reliability.
R-Series gas burners up to the 250 size are available as either classic or new chassis style.
R-Series classic chassis gas burners utilize Siemens LFL or Siemens LMV3.
New chassis style burners utilize Honeywell RM7840L, Siemens LMV3 or LMV5 controls, incorporating as standard (5) indicating lights and alarm horn with silencing.

Specification

Monoblock forced draught gas burner with two stage operation, fully automatic, made up of:
– Air suction circuit Xith sounE QrooGing Naterial
– High performance fan with straight blades
– Air damper for air flow setting and butterfly valve for regulating fuel output on 1st and 2nd stage controlled by
a servomotor with variable cam
– Starting motor at 2800 rpm, single-phase / 220-230V / 50-60Hz or three-phase / 380-400V / 50-60Hz
– Combustion head, that can be set on the basis of required output, fitted with:
– stainless steel end cone, resistant to corrosion and high temperatures
– ignition electrodes
– ionisation probe
– gas distributor
– flame stability disk
– Exclusive patented HCS (Housing Cooling System) with high thermal insulation and air circulation with continuous
air volume refresh for an active cooling system and avoid heat transfer to the electrical component housing
– Minimum air pressure switch stops the burner in case of insufficient air quantity at the combustion head
– Microprocessor-based burner safety control box, with diagnostic functions
– Plug and socket for electrical connections accessible from the external of the cover
– Burner on/off selection switch
– 1st – 2nd stage manual switch
– Flame inspection window
– Slide bars for easier installation and maintenance
– Protection filter against radio interference
– IP X0D (IP 40) electric protection level.
StanEarE eRuiQNent
– 1 gas train flange
– 1 flange gasket
– 4 screws for fixing the flange
– 1 thermal screen
– 4 screws for fixing the burner flange to the boiler
– 3 plugs for electrical connection (RS 34 – 44 MZ single-phase)
– 4 plugs for electrical connection (RS 44 MZ three-phase)
– Instruction handbook for installation, use and maintenance
– Spare parts .

Monoblock forced draught gas burner with two stage operation, fully automatic, made up of:
– Air suction circuit lined with sound-proofing material
– Fan with reverse curve blades (RS 50 – 70 – 100 – 130 models) or straight blades (RS 64 MZ – 150-190 models)
– Air damper for air flow setting and butterfly valve for regulating fuel output on 1st and 2nd stage controlled by
a servomotor with variable cam
– Starting motor at 2800 rpm, three-phase 400V with neutral, 50Hz
– Combustion head, that can be set on the basis of required output, fitted with:
– stainless steel end cone, resistant to corrosion and high temperatures
– ignition electrodes
– ionisation probe
– gas distributor
– flame stability disk
– Minimum air pressure switch stops the burner in case of insufficient air quantity at the combustion head
– Microprocessor-based burner safety control box, with diagnostic functions
– Plug and socket for electrical connections (RS 50-64 models)
– Burner on/off selection switch
– 1st – 2nd stage manual switch
– Flame inspection window
– Slide bars for easier installation and maintenance
– Protection filter against radio interference
– IP 44 electric protection level.
StanEarE eRuiQNent
– 1 gas train flange
– 1 flange gasket
– 4 screws for fixing the flange
– 1 thermal screen
– 4 screws for fixing the burner flange to the boiler
– Wiring loom fittings for the electrical connection (RS 50-64)
– 2 slide bar extensions (for extended head models and RS 150-190 model)
– Instruction handbook for installation, use and maintenance
– Spare parts

Hubungi Kami
PT. SUMBER TEKNIK INDUSTRI

Jl. Mangga Pesona Lebak Wangi 2 blok A3 no 15 Kec, Sepatan Timur Kab, tangerang Propinsi Serang Banten 15521

Whatsapp : 0852 8276 2784

Mobile      : 0852 82762 784

Email        : idmslamet@gmail.com

Website    : https://boilersburner.com

Referensi :https://www.jualboileridm.com/